マイクロソフトの70-410 問題例の認定試験に合格すれば、就職機会が多くなります

 

ここで説明したいのはJapanCertにあるコアバリューです。全てのMicrosoftの70-410 問題例は非常に大切ですが、この情報技術が急速に発展している時代に、JapanCertはただその中の一つだけです。ではなぜほとんどの人々はJapanCertを選んだのですか。それはJapanCertが提供する問題資料は絶対あなたが試験に受かることを助けられるからです。JapanCertが提供する資料は最新のトレーニングツールが常にアップデートして認証試験の目標を変換するの結果です。JapanCert はあなたに最新の試験研究資料を提供しますから、JapanCert Microsoftの70-410 問題例を持っていたら、試験に直面する自信に満ちることができ、合格しないなんて全然心配することはなく気楽に試験に受かることができます。

ITエリートになるという夢は現実の世界で叶えやすくありません。しかし、Microsoftの70-410 問題例に合格するという夢は、JapanCertに対して、絶対に掴められます。JapanCertは親切なサービスで、Microsoft70-410 問題例が質の良くて、Microsoft70-410 問題例に合格する率も100パッセントになっています。JapanCertを選ぶなら、私たちは君の認定試験に合格するのを保証します。

70-410試験番号:70-410 勉強資料
試験科目:「Installing and Configuring Windows Server 2012
最近更新時間:2017-06-28
問題と解答:480

>> 70-410 勉強資料

 

弊社のIT業で経験豊富な専門家たちが正確で、合理的なMicrosoft 70-410 問題例を作り上げました。 弊社の勉強の商品を選んで、多くの時間とエネルギーを節約こともできます。

NO.1 Your network contains a domain controller that is configured as a DNS server. The server hosts
an Active Directory-integrated zone for the domain.
You need to reduce how long it takes until stale records are deleted from the zone. What should you
do?
A. From the configuration directory partition of the forest, modify the tombstone lifetime.
B. From the configuration directory partition of the forest, modify the garbage collection interval.
C. From the start of authority (SOA) record of the zone, modify the refresh interval and the expire
interval.
D. From the aging properties of the zone, modify the no-refresh interval and the refresh interval.
Answer: D

70-410 認定   
Explanation:
Scavenging automates the deletion of old records. When scavenging is enabled, then you should also
change the no-refresh and refresh intervals of the aging properties of the zone else it may take too
long for stale records to be deleted and the size of the DNS database can become large and have an
adverse effect on performance.

NO.2 You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 has the
virtual switches listed in the following table.
You create a virtual machine named VM1.VM1 has two network adapters. One network adapter
connects to vSwitch1. The other network adapter connects to vSwitch2.You configure NIC teaming on
VM1.
You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network.
What should you do on Server1?
A. Add a new network adapter to VM1.
B. Create a new virtual switch on Server 1.
C. Modify the properties of vSwitch1 and vSwitch2.
D. Run the Set-VmNetworkAdaptercmdlet.
Answer: D

NO.3 You have a server named Server1 that runs Windows Server 2012 R2.
You plan to enable Hyper-V Network Virtualization on Server1.
You need to install the Windows Network Visualization Filter Driver on Server1.
Which Windows PowerShell cmdlet should you run?
A. Set-NetAdapterVmq
B. Set-NetVirtualizationGlobal
C. Enable-NetAdapterBinding
D. Add - WindowsFeature
Answer: C
Explanation:
Hyper-V Network Virtrtualization runs multiple virtual networks on a physical network. And each
virtual network operates as if it is running as a physical network. The Set-NetAdaptercmdlet sets the
basic properties of a network adapter such as virtual LAN (VLAN) identifier (ID) and MAC address.
Thus if you add the binding parameter to the command then you will be able to install the Windows
Network Virtualization Filter Driver. Step one: Enable Windows Network Virtualization (WNV). This is
a binding that is applied to the NIC that you External Virtual Switch is bound to. This can be a physical
NIC, it can be an LBFO NIC team. Either way, it is the network adapter that your External Virtual
Switch uses to exit the server. This also means that if you have multiple virtual networks or multiple
interfaces that you can pick and choose and it is not some global setting. If you have one External
Virtual Switch this is fairly easy: $vSwitch = Get-VMSwitch -SwitchType External # Check if Network
Virtualization is bound # This could be done by checking for the binding and seeing if it is enabled
ForEach-Object -InputObject $vSwitch { if ((Get-NetAdapterBinding -ComponentID "ms_netwnv" -
InterfaceDescription $_.NetAdapterInterfaceDescription).Enabled -eq $false){ # Lets enable it Enable-
NetAdapterBinding -InterfaceDescription $_.NetAdapterInterfaceDescription -ComponentID
"ms_netwnv" } }

NO.4 Your network contains an Active Directory domain named contoso.com. The domain contains
a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role
installed. Server1 has a virtual switch named RDS Virtual.
You replace all of the network adapters on Server1 with new network adapters that support single-
root I/O visualization (SR-IOV).
You need to enable SR-IOV for all of the virtual machines on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Delete, and then recreate the RDS Virtual virtual switch.
B. On each virtual machine, modify the Hardware Acceleration settings of the network adapter.
C. On each virtual machine, modify the Advanced Features settings of the network adapter.
D. On each virtual machine, modify the BIOS settings.
E. Modify the settings of the RDS Virtual virtual switch.
Answer: A,B

70-410 更新   70-410 回答   
Explanation:
The first step when allowing a virtual machine to have connectivity to a physical network is to create
an external virtual switch using Virtual Switch Manager in Hyper-V Manager. The additional step that
is necessary when using SR-IOV is to ensure the checkbox is checked when the virtual switch is being
created. It is not possible to change a "non SR-IOV mode" external virtual switch into an "SR-IOV
mode" switch. The choice must be made a switch creation time. Thus you should first delete the
existing virtual switch and then recreate it.
E: Once a virtual switch has been created, the next step is to configure a virtual machine. SR-IOV in
Windows Server "8" is supported on x64 editions of Windows "8" as a guest operating system (as in
Windows "8" Server, and Windows "8" client x64, but not x86 client).We have rearranged the
settings for a virtual machine to introduce sub-nodes under a network adapter, one of which is the
hardware acceleration node. At the bottom is a checkbox to enable SR-IOV.

JapanCertは最新の201-01問題集と高品質の352-001問題と回答を提供します。JapanCertの070-398 VCEテストエンジンとC_HANATEC_11試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の1z1-588 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/70-410.html